- Light duty bending brakes are for light forming requirements
(up to 16 gauge mild steel).
- When used within their rated capacity, they will form a minimum 1/2" flange over their entire length.
- Adjustable back gauge are ideal for small, precise box and pan work ( up to 3" deep ).
- It will accommodate sheet metal up to 16 gauge.
- Will bend as much as a 135¡ angle in up to a 24-inch length.
- Standard fingers provided include one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6". Fingers are heat-treated die steel, precision ground.
- Set of fingers can be arranged to form 3/4: to 24" in 1/4" increments.
- Back gauge adjustment is from 0-24".
- Adjustable friction brake lock stops upper bar dead-weight drop and permits precise positioning of upper bar to scribed line on workpiece before final clamping.
- The pan brakes have optional special fingers to adapt them to inside mitered lip boxes, 9" long square tubes and radius bends up to 1".
- The floor mount stand shown must be ordered as a separate item.
- Minimum 1/4" reverse bends are possible with these light duty brakes by removing both the apron angle iron work support and apron filler plate and reducing the capacity by four gauges.
- Extension Fingers for inside mitered lip boxes, minimum 2 1/2" square box.
- Radii Fingers Available in widths of 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6" with radii of 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", and 1".
- Open End Finger for square tubes up to 9" long. Taper from 3/4" to 1 1/2".
- *Only 20° when box fingers are used.
|
