Sierra Victor Industries MODEL 1118H-CNC - 14.5" SHARP® CNC Tool Room Lathe

14.5" SHARP® CNC Tool Room Lathe
[1118H-CNC]

Call For Price

Click to enlarge

ITEM

14.5" CNC Tool Room Lathe

MAKE

SHARP®

MODEL

1118H-CNC PLUS

PART

1118H-CNC PLUS

PRICE

$CALL

PHOTOS - PLEASE CLICK ON THUMBNAIL BELOW TO VIEW PHOTOS

WARRANTY

SPECIFICATIONS

CAPACITY	Swing over bed	14.5"
	Swing over carriage	12.37"
	Swing over cross slide	6"
	Tool Height	1/2"
	Tooling Plate Size	7.5" x 12" (7.5" x 15" opt.)
	Maximum X-Axis Travel	9" (12" opt.)
	Maximum Z-Axis Travel	5" (8" opt.)
	Feed Rate	200 ipm
	Rapid Traverse	500 ipm
	Carriage Base Movement (Manual)	13.4"
	Drive System (X & Z Axis)	AC Servo Drive
	Linear Guideway System	25mm by NSK
	Ballscrews	20 mm (3/4"), C3 Precision Ground
SPINDLE	Spindle Speed Range (Programmable)	100-4,000 rpm
	Spindle Through Hole	1-1/16"
	Spindle Collet, Chuck	5C, (6" chuck opt.)
	Spindle Motor	5 HP
	Positioning	+/- 0.00008"
	Repeatability	+/- 0.00004"
	Spindle TIR	0.00005"
	Anilam Model 4200T	PC based, with 12.1" TFT active matrix screen, 8GB hard-disk, 8MB ram, 3.5" floppy drive, Conversational or G-code programming.
GENERAL	Electricity	220v, 60hz, 3 phase (440v opt.)
	Coolant Pump Motor	0.25 HP
	Net Weight (approx)	2,700 lbs
PRICES	OUR PRICE	$CALL

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

FEATURES

A high precision toolroom CNC lathe that can operate using quick change tool holder or gang type tooling. Machine is equipped with Anilam 4200T 2 axis control, alloy steel bedways, spindle accuracy up to 50 millionth. Ideal for small, high precision work.
14-1/2 “ swing over bed ways, 12-3/8” swing over carriage, 6” swing over cross slide.
Machine can use Gang type tooling or quick change tooling with tailstock.
Positioning: +/- 0.000080”, repeatability: +/- 0.000040”, spindle run out 0.000050” TIR.
Programmable spindle speeds up to 4,000 rpm.
Constant Surface Speed.
Alloy steel used on full bed-width bearing surface with dovetail design.
Over size cross slide for extra rigidity.
Oversized preloaded ball screw supported at both ends by angular contact bearings.
AC servo motors for X and Z axis travel.
Anilam Model 4200T 2 axes CNC control.
Full CNC operation and complete manual operation.
Manual operation offers 1 hand wheel 2 axes simultaneous movement for cutting taper.
Make first part manually, subsequent parts automatically (teach-in function).
G-code or conversational programming.
2 front mounted electronic hand wheels (MPG).
Pneumatic power 5C collet closer (standard).
Automatic lube system with low level alarm.
CNC threading with multiple leads capability.
5 HP spindle motor.

STANDARD EQUIPMENT

OPTIONAL ITEMS

Sierra Victor ... your source for new and used machinery.